SD5 Digital
Mixing Console

The second coming of a classic console

SD5
  • 253 Input Channels
  • 128 Aux / Sub-Group Busses
  • LR/LCR/5.1 Master Buss
  • 24 x 24 Full Processing Matrix
  • 253 Dynamic Equalizers
  • 48/96kHz Sample Rate

DiGiCo SD5: The heir to an icon

Just as the iconic D5 Live once fuelled the growth of digital mixing, now the DiGiCo SD5 adds the immense power of Stealth Digital Processing and floating-point Super FPGA technology to the feature set that changed the world of professional audio.

A total of 37 faders are laid out in three easy-to-operate banks of 12 with one master fader plus three 15-inch full colour TFT touchscreens for immediate access to functions and multi-user applications. Two Interactive Dynamic Metering (IDM) displays offer the same at-a-glance operation as the SD7, while the centrally located master screen is incorporated into the meter-bridge, so the engineer’s attention remains where it belongs – on the artist.

With the SD5, you define the workflow: recall or save presets on the channel strip; recall or save snapshots using the master screen or simply use the dedicated switches on the surface. Special functions can be assigned and accessed instantly via 40 Smart Key Macros, accessed via four layers of 10 RGB backlit keys.

Under The Hood

With up to 253 processing channels at 48kHz/96kHz, the SD5 is reassuringly powerful. Standard channel processing across inputs and outputs includes Channel Delay, Single and Multi-Channel Presets, Hi- and Lo-pass filters @ 24dB/octave, four-band parametric EQ (eight on the outputs) with band curve selection, Dual insert points, and DiGiCo’s renowned DYN 1 (Compressor, De-esser or Multiband Compressor) and DYN 2 (Gate, Compressor or Ducker).

In addition, 253 Dynamic EQ processors are available on any input or output channel, delivering dynamic processing over the four standard parametric bands, plus 253 Multiband Compressors and 253 DiGiTuBes. All channels deliver the same pure signal path and feature set, so no matter how you set up your console, you never lose any resources. Within the master section are 32 gangable 32 band graphic EQs, 32 stereo effects (selectable from a palette of 33), and 36 control groups (VCAs). Using snapshots, engineers can switch between complete configurations at a touch.

In addition, the SD5’s 128 configurable busses are all assignable as mono/stereo groups or auxiliary busses, while even more configurability comes courtesy of a 24 x 24 output matrix, dual solo busses, and an LR/LCR/5.1 Master Buss. Unlike all other digital console manufacturers, you don’t lose Aux or Group Busses when using the Matrix as they are in addition, including the Master buss.

I/O

The rear of the SD5 houses a wealth of I/O, including eight mic inputs, eight line outputs, eight mono AES I/O, four redundant MADI ports, and one Optocore loop. This equates to an incredible 1,264 I/O connections on a single optic loop with just one work surface.

Get instant access to 32 fully integrated low-latency Waves stereo MultiRacks, each with up to eight plug-ins per rack, by fitting an optional DiGiCo SoundGrid module linked to external SoundGrid or DiGiGrid servers, giving a total of 128 additional I/O.

SD5 I/O Racks & Options

The following rack options are available:

  • SD-Rack

  • SD-MiNi Rack

  • SD-Nano Rack

  • D2-Rack

  • D-Rack

The following interfaces and accessories are available:

  • Orange Box

  • Waves SoundGrid

  • Little Red Box

  • Purple Box

  • Little Blue Box

  • UB MADI

Other related products:

  • SD5B

  • SD5CS

SD5 High Rez Image Gallery

253
Input Channels
253
Dynamic EQ
253
DiGiTuBes
32
Digital FX

SD5 Specifications

General Specifications

  • Faders 37 x 100mm touch-sensitive, motorised
  • Screens 3 x 15” LCD high – resolution touch screens
  • Meterbridge 2 x Custom Mounted LCD high-resolution TFT-LCD screens
  • Up to 253 Input Channels
  • Busses Up to 128 plus masters Aux / Group busses with full processing – LR/LCR/5.1 Master Buss
  • Matrix Up to 24 Input / 24 Outputs with full processing
  • Control Groups Up to 36, selectable for VCA-style, Moving fader, Mute Group
  • Graphic Eq 32 x 32-band, Gain +/- 12dB
  • Internal FX Up to 32 stereo effects comprising up to 16 floating point reverbs and up to 24 delay/chorus/pitch/enhancer
  • Local I/O 8 x mic/line I/O, 8 x AES I/O
  • MADI interface 4 redundant interfaces, BNC connectivity
  • Standard Optics (Dual Loop – Optional)
  • Sampling rates 48kHz / 96kHz
  • GPIO: 2 x DSub37
  • Ext Sync Wordclock, AES, Video, MADI, Optics
  • SD5 Dimensions: 1465 mm (w) x 838mm (d) x 458 mm (h)
  • SD5 Weight: 116Kg /256lbs. (235Kg / 518lbs. with flightcase)
  • SD5 Flightcase: 1600 mm (w) x 600mm (d) x 1200 mm (h)
  • Power Requirements 90V-260V, 50-60Hz, 532VA (340W)

Audio Specification

  • Sample Rate: 48kHz or 96kHz
  • Processing Delay: 2ms Typical @ 48k (253 Channels, Stage Input Through L-R Buss to Stage Output) 1.1ms @96k
  • Internal Processing: Up to 40-bit, Floating Point
  • A>D & D>A: 24-bit Converter Bit Depth
  • Frequency Response: +/- 0.6dB (20Hz – 20kHz)
  • THD: <0.05% @ Unity Gain,: 10dB Input @ 1kHz
  • Channel Separation: Better Than 90dB: (40Hz – 15kHz)
  • Residual Output: <90dBu Typical
  • Noise: (20Hz – 20kHz)
  • Microphone Input: Better Than -126dB: Equivalent Noise
  • Maximum Output Level: +22dBu
  • Maximum Input Level: +22dBu

Processing Channel Specification

  • Input Channel
  • Name: User-Defined / Presets
  • Channel Selection: Mono / Stereo / Multi
  • Input Routing: Main & Alternate Input
  • Analogue Gain: -20 to +60dB
  • Phase: Normal / Reverse
  • Digital Trim: -40 to +40dB
  • Delay: >1 Sec (Coarse & Fine Control)
  • DiGiTuBe: Drive 0.01 – 50.0
  • Bias 0 – 6
  • LPF: 20 – 20kHz, 24dB/Oct
  • HPF: 20 – 20kHz, 24dB/Oct
  • Insert A: (Pre EQ/Dyn) On/Off
  • Equalisation: 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/
    Hi Shelf, Hi/Hishelf)
    On/Off
    Freq; 20 – 20kHz
    Gain; +/- 18dB
    Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
    Dynamic EQ On/Off
    Over/Under
    Band On/Off
    Threshold; -60 – 0dB
    Attack; 500us – 100ms
    Release; 10ms – 10s
    Ratio; 1:1 – 50:1
  • Dynamics 1: Single or Multiband (3-Band)
    Compressor: On/Off
    Threshold; -60 – 0dB
    Attack; 500us – 100ms
    Release; 10ms – 10s
    Ratio; 1:1 – 50:1
    Gain; 0 to +40dB with
    Autogain Option
    Link; Any Channel/Buss
    Hi Crossover; 20Hz – 20kHz
    Lo Crossover; 20Hz – 20kHz
    Knee : Hard, Med, Soft De-Esser: Threshold : 20us – 20ms
    Release : 1ms – 100ms
    Ratio : 1:1 – 50:1
    Ess-Band : Listen On/Off
    Ess-Band Filter Freq / Width: 20Hz – 20kHz
  • Dynamics 2: On/Off
    Gate / Ducker: Threshold; -60 – 0dB
    Attack; 50us – 100ms
    Hold; 2ms – 2s
    Release; 5ms – 5s
    Range; 0 – 90dB
    Key; Any Source
    Key Listen
    Freq/Width; 20 – 20kHz Compressor: On/Off
    Threshold; -60 – 0dB
    Attack; 500us – 100ms
    Release; 10ms – 10s
    Ratio; 1:1 – 50:1
    Gain; 0 to +40dB with
    Autogain Option
    Link; Any Channel / Buss
    Hi Crossover; 20Hz – 20kHz
    Lo Crossover; 20Hz – 20kHz
    S/C Source : Any Source
    S/C Listen : On/Off
    S/C Filter Freq/Width: 20Hz – 20kHz
  • Insert B: (Post EQ/Dyn) On/Off
  • EQ/Dyn order: EQ/Dyn or Dyn/EQ
  • Mute: Channel Mute / Hard Mute
  • Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
  • Channel Safe: Input, EQ, Dyn, Aux, Pan, Fade/Mute, Inserts, Buss, Directs,
  • Full Safe
  • Output Routing: Buss, Insert A, Insert B, FX
  • Direct: On/Off, Pre-Mute / Pre-Fade / Post-Fade, Level +/- 18dB
  • Fader: 100mm Motorised Fader ∞ to +10dB

Processing Channel Specification

  • Aux / Group / Matrix Output
  • Name: User-Defined / Presets
  • Phase: Normal / Reverse
  • Digital Trim: -20 to +60dB
  • Delay: >1 Sec (Coarse & Fine control)
  • DiGiTuBe: Drive 0.01 – 50.0
  • Bias 0 – 6
  • LPF: 20 – 20kHz, 24dB / Oct
  • HPF: 20 – 20kHz, 24dB / Oct
  • Insert A: (Pre EQ/Dyn) On/Off
  • Equalisation: 8 Band EQ: 4 band Parametric and 4 band parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hi Shelf, Hi/Hishelf)
    On/Off
    Freq; 20 – 20kHz
    Gain; +/- 18dB
    Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
    Dynamic EQ On/Off
    Over/Under
    Band On/Off
    Threshold; -60 – 0dB
    Attack; 500us – 100ms
    Release; 10ms – 10s
    Ratio; 1:1 – 50:1
  • Dynamics 1: Single or Multiband (3-band)
    Compressor: On/Off
    Threshold; -60 – 0dB
    Attack; 500us – 100ms
    Release; 10ms – 10s
    Ratio; 1:1 – 50:1
    Gain; 0 to +40dB
    with Autogain Option
    Link; Any Channel / Buss
    Hi Crossover; 20Hz – 20kHz
    Lo Crossover; 20Hz – 20kHz
    Knee : Hard, Med, SoftDe-Esser: Threshold: 20us – 20ms
    Release: 1ms – 100ms
    Ratio: 1:1 – 50:1
    Ess-Band: Listen On/Off
    Ess-Band Filter Freq/Width: 20Hz – 20kHz
  • Dynamics 2: On/Off
    Gate / Ducker: Threshold; -60 – 0dB
    Attack; 50us – 100ms
    Hold; 2ms – 2s
    Release; 5ms – 5s
    Range; 0 – 90dB
    Key; Any Source
    Key Listen
    Freq/Width; 20 – 20kHzCompressor: On/Off
    Threshold; -60 – 0dB
    Attack; 500us – 100ms
    Release; 10ms – 10s
    Ratio; 1:1 – 50:1
    Gain; 0 to +40dB with Autogain Option
    Link; Any Channel/Buss
    Hi Crossover; 20Hz – 20kHz
    Lo Crossover; 20Hz – 20kHz
    S/C Source : Any source
    S/C Listen : On/Off
    S/C Filter Freq/Width: 20Hz – 20kHz
  • Insert B: (Post EQ/Dyn) On/Off
  • EQ/Dyn Order: EQ/Dyn or Dyn/EQ
  • Mute: Channel Mute / Hard Mute
  • Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
  • Channel Safe: Trim, EQ, Dyn, Fade/Mute, Inserts, Outputs, Full Safe
  • Output Routing: Outputs, Insert A, Insert B, FX
  • Fader: 100mm Motorised Fader ∞ to + 10dB

SD5 Brochure

SD5 Selected Case Studies

Case studies featuring the DiGiCo SD5. View latest DiGiCo news and case studies here.

SD5 Downloads

Product Literature
DiGiCo SD5 Data Sheet DOWNLOAD
SD Range Brochure DOWNLOAD
Manuals
SD5 Getting Started DOWNLOAD
SD Software Reference V2 DOWNLOAD
Software
Console
SD5 V1280 Update Package DOWNLOAD
SD-Range Core2 App DOWNLOAD
DiGiCo Dante DMI 64@96 4.0.10.3 4.0.17 Firmware-Package DOWNLOAD
Dante Firmware Update (4.0.9.1) for Dante DMI and Dante SD-Rack cards (November 2018) DOWNLOAD
Offline
SD5 V1280 Offline Install Package DOWNLOAD
SD Convert V1280 Installer Package DOWNLOAD
TN's
TN325 SD Apple Airport DOWNLOAD
TN324 SD series iPad external control setup DOWNLOAD
TN319 Use of Optocore units with Digico systems DOWNLOAD
TN300 SD Optocore wordclock operation description DOWNLOAD
TN299 SD MADI redundant operation description DOWNLOAD
TN296 Recording to MADI with Digico systems DOWNLOAD
TN294 SD series MADI implementation description DOWNLOAD
TN269 SD series recovery system description DOWNLOAD
TN241 SD series Touch calibration (Not SD7 See TN242) DOWNLOAD
TN195 SD Series Network Settings DOWNLOAD
TN70 UPS and power consumption all products DOWNLOAD
TB106 Madi cable specifications DOWNLOAD
TB101 Optical cable specifications DOWNLOAD
Drawings
DXF
SD5 DXF DOWNLOAD
PDF
SD5 / SD5CS PDF DOWNLOAD
Download

Before downloading this file please read and consent to the EULA.

DOWNLOAD